Tonker Edited 19.jpg
 

TONKER 830 PILE DRIVER

Fast, Powerful & Versatile

The basic model can be configured for many piling applications:

  • Solar Energy Farm PV Mounting

  • Carports

  • Screw Foundations

  • Commercial Fencing (carrying arms can be customised to carry additional posts/piles at a MAX 1000Kg)

  • Road Safety Barriers

Tonker Edited 14.jpeg
 
Tonker Edited 9.jpeg

TONKER 830 PRICES

Tonker 830 pile driver has many configurations.  To help us provide you with the right configuration & price please contact us.

 

TONKER 830 FEATURES

High Quality Italian Engineered Pile Driver

The Tonker 830 is certified as being built to the highest EU safety and quality regulations. 
The manufacturers work to stringent ISO 9001 (Quality) & 14001 (Environmental) standards.

 

ENGINE

The Tonker 830 is powered by a silent, eco-friendly Yanmar 4TNV88-BDYED water-cooled, low-emission diesel engine.

For the USA & Canada the Yanmar engine is upgraded to the Stage V Tier 4F.

DSC_0023-77f3eeff-2866f29d-1920w.png

SOME INSTALLERS USING THE TONKER 830

Tonker 830 FGM Solar Group

Have installed using the Tonker 830's in many countries including the state of Nevada, USA. Presently installing in Holland.

FGM Solar Group

Tonker 830 Pile Drivers, OMP Renovables, Pile Driver UK

They replaced their entire fleet with the Tonker 830 and have been using them for many years.

OMP Renovables

Tonker 830 Solar DQD

Installers based in Latin America

Solar DQD

 

OPTIONAL EXTRAS

Below are some examples

EXTRACTOR

6000 KG Extraction Force

A Pull Out Testing System Available

ROTARY DRILLS

Small (1,500Nm) / Large (2,500Nm) / Down-The-Hole (DTH) Hammer


Large selection of bits + Complete kits available

GPS SYSTEM

Fully, Semi Autonomous & Basic

HAMMER IMPACT PLATE MASKS

Can be customised to customer requirements ( up to three designs )

ROCK SPIKE

Can make a hole up to ∅100 mm

AUTO LEVELLING SYSTEM

Accurate Plumb Line

LARGE ROTARY HEAD

For screw piling using a screw rotary head (for 3m screw piles) 10,000 Nm Torque, 20-45 RPM going to a depth of up to 18m

FORK STABILISER

Can be customised to customer requirement

AUGERS

Options: ∅200 mm & ∅200 mm with tip.  ∅250 mm & ∅250 mm with tip.

 
EV Carports_edited.jpg

CARPORTS

Customised Tonker 830 Pile Driver Ideal For Carport Construction

Solar carports are the next step in utilising solar energy. 


To be involved in this new phase, installers will a need a pile driver that can drive longer and more robust steel piles into the ground. 


The Tonker 830 can be customised with a larger 1200 Joules hammer able to drive the required heavy 300kg-350kg deep into the ground/tarmac. 


The Tonker 830's taller column is designed to handle piles up to 6.1m in length which is ideal for this work because carport foundations require the steel beam to go down to a depth of at least 5m, leaving 500mm - 1m above ground to attach the structure.


The lifting mechanism assists the operator to place the heavy piles safely under the hammer.

 
roadsafetybarrier.png

ROAD SAFETY BARRIERS

Tonker 830 Pile Driver: Ideal For Road Safety Barrier Installation & Highway Fencing / Piling Projects

No need for concrete saving you time and materials.

The machine comes with rubber tracking ideal for use on tarmac as standard.

If the project requires concrete, the Tonker can be purchased with different size augers to dig out the foundation hole quickly and uniformly. 

 

TONKER 830
TECHNICAL SPECIFICATIONS

QUICK FACTS

  • Weight: 4000Kg

  • Dimensions: 2200mm x 2200mm x 1800mm (with folded mast)

  • Longitudinal Slope MAX: 23% (13º)

  • Transverse Slope MAX: 17% (10º)

  • Work Pressure: 180 Bar

  • Hydraulic Oil Tank Capacity: 180 Litres

  • Speed of Machine: 4.5 KM/H

  • Fuel Tank Capacity: 55 Litres

  • Maximum Pile Height: 6.1 Metres 

HAMMER
(INDECO SPA)

  • Impact Power: 950/1200 Joules

  • Weight: 185 KG (working weight 350 Kg) / 285 Kg (working weight 550 Kg)

  • Beats Per Minute: 620 - 1500 / 580 - 1180

  • Work Pressure: 180 Bar

  • Oil Flow (Litres Per Minute): 60 / 90

ENGIINE
YANMAR TIER 3 4TNV88-BDYED

  • Power (KW):  18 - 35.4 (Variable)

  • REVS Per Minute: 3000

  • Hydraulic Pump (Model): Pump DANFOSS Gruppo 3 (in cast iron)

  • Hydraulic Pump Engine Capacity (CC): 34

  • Liquid Cooling: Yes

  • 140 Bar Dry Air Filter: Yes 

 

JUST A FEW EXAMPLE LOCATIONS

Tonker 830 Is Used All Over The World By Serious Installers

MONTESOL - SPAIN

25 MW

GRAFHAM - UK

11.6 MW

DUBAI - UAE

195 MW

PENONOME - PANAMA

150 MW

BEN BAN - EGYPT

126 MW

SHOTWICK - UK

72 MW

OWL'S HATCH - UK

30 MW

SIX HILLS - UK

19 MW

GUYND - SCOTLAND

5 MW

AL MAKTOUM - UAE

500 MW+

CALTAGIRONE - ITALY

11 MW

RAMPISHAM - UK

5 MW

 
Tonker Edited 16.jpeg

FREQUENTLY ASKED QUESTIONS

Answers You Need

 

WHAT ARE THE PAYMENT METHODS?

There are two options using appropriate money transfer:

1. 30% Invoice value upon ordering and 70% prior to arranging delivery/shipping

2. Full payment upon ordering. Please note that before fulfilling orders money must show as transferred.

WHAT ARE THE DELIVERY TIMES?

Delivery time will depend on destination, transport method, model and optional extras required.

Usually four basic 950 joules/5.5m column (able to handle up to 5.1m piles) machines are available in stock.  We can arrange delivery for them as soon as complete payment is made.  In case your order exceeds stock/no machines are in stock, you will be given an estimated availability time. 

WHAT ARE THE DELIVERY METHODS?

This depends on delivery destination.


We use containers to ship by sea.  One 20ft container can hold up to 3 machines.  Cost is the same for 1-3 machines.  Collection from port is organised by customer.


Within Europe we usually deliver to destination by truck/lorry. Cost is the same for 1-3 machines.

WHAT ARE THE PACKAGING METHODS?

The machine is delivered assembled and ready to be used. Only the column is folded onto itself. It is easily re-assembled.


It is not packaged, but specially designed hooks on the machine are used to secure the machine from moving and protect from damage.


The pile driver has a small amount of fuel sufficient for the machine to be unloaded.

HOW LONG IS THE WARRANTY?

12 months from date of purchase.

WHAT DOES THE WARRANTY COVER?

The one-year manufacturers warranty covers: engine, hammer, pump and caterpillar tracks. However, it does not cover serviceable wear and tear items, the body and structural parts, and hoses. For full information please read Use and Warranty Manual

IS THE MACHINE EQUIPPED WITH ACCESSORIES?

The Tonker 830 is a basic model but can be modified/configured and also equipped with many optional extras. For example you can decide to have a 6.5 metre column (handling piles up to 6.1 metres), 5.5 metre column (handling up to 5.1m piles) or a 4.5 metre (handling up to 4.1m piles).  Metal tracking instead of rubber etc.


Many optional extras are available such as: pile extractor, small and large rotary drill heads, rotary heads for screw piling, spikes, augers, auto-levelling system, GPS and much more. 


Please check with Pile Driver UK for the cost and prices of these modifications and extras.

WHAT CERTIFICATION DOES THE TONKER 830 HAVE ?

The machine is certified that it fulfills all EU safety standards and has the required documents. The CE mark attests that all the EU safety requirements and directives have been fulfilled. This ensures that the machine is safe to use when following the Manual of Use.


The manufacturer is also accredited with ISO 9001 and 14001 ensuring the manufacturing process is checked and controlled so the final product is of the highest quality and very durable.

WHAT ARE SOME PILE DIMENSIONS THE TONKER 830 CAN HANDLE?

It can drive in a max 300mm diameter round post.


Some examples of square/rectangular post dimensions it can drive in: 230mm x 170mm, 202mm x 202mm, and 250mm x 110mm.

Each machine includes an impact plate mask which if you wish can be customised with three pile patterns of your choice.

WHAT IS THE SPACE REQUIRED FOR TRANSPORTING EACH MACHINE?

Height: 2400 mm
Width: 2400 mm
Length: 3000 mm